Using PowerMac machine description Total memory = 1024MB; using 2048kB for hash table (at cfe00000) Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.5-127.fc12.ppc (mockbuild@ppc7.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 Sat Nov 7 20:56:11 EST 2009 Found initrd at 0xc1500000:0xc20b3800 Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2 Mapped at 0xff7c0000 Found a Intrepid mac-io controller, rev: 0, mapped at 0xff740000 Processor NAP mode on idle enabled. PowerMac motherboard: Mac mini console [udbg0] enabled Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 PCI host bridge /pci@f0000000 ranges: MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 PCI host bridge /pci@f2000000 (primary) ranges: MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 PCI host bridge /pci@f4000000 ranges: MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 55 nvram: Checking bank 0... nvram: gen0=180, gen1=181 nvram: Active bank is: 1 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 Top of RAM: 0x40000000, Total RAM: 0x40000000 Memory hole size: 0MB Zone PFN ranges: DMA 0x00000000 -> 0x00030000 Normal 0x00030000 -> 0x00030000 HighMem 0x00030000 -> 0x00040000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00040000 On node 0 totalpages: 262144 free_area_init_node: node 0, pgdat c06d41f0, node_mem_map c078b000 DMA zone: 1536 pages used for memmap DMA zone: 0 pages reserved DMA zone: 195072 pages, LIFO batch:31 HighMem zone: 512 pages used for memmap HighMem zone: 65024 pages, LIFO batch:15 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 Kernel command line: ro root=UUID=aed2954f-ac03-412d-805d-34d0198379c8 LANG=ru_RU.UTF-8 KEYTABLE=ru PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) allocated 5242880 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups High memory: 262144k Memory: 1011664k/1048576k available (6736k kernel code, 36212k reserved, 300k data, 585k bss, 312k init) Kernel virtual memory layout: * 0xfffef000..0xfffff000 : fixmap * 0xff800000..0xffc00000 : highmem PTEs * 0xfdcda000..0xff800000 : early ioremap * 0xf1000000..0xfdcda000 : vmalloc & ioremap SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Hierarchical RCU implementation. NR_IRQS:512 mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 64, shift: 6, mask: 3f mpic: Initializing for 64 sources irq: irq 55 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 55 GMT Delta read from XPRAM: 0 minutes, DST: off time_init: decrementer frequency = 41.620997 MHz time_init: processor frequency = 1416.666661 MHz clocksource: timebase mult[601af77] shift[22] registered clockevent: decrementer mult[aa7ac74] shift[32] cpu[0] Console: colour dummy device 80x25 console handover: boot [udbg0] -> real [tty0] Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1" Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls ftrace: allocating 17584 entries in 52 pages regulator: core version 0.5 NET: Registered protocol family 16 MPC7450 family performance monitor hardware support registered rstcr compatible register does not exist! irq: irq 42 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 42 KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 channel 0 bus channel 1 bus irq: irq 26 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 26 KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 channel 0 bus PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c channel 1 bus channel 2 bus __ioremap(): phys addr 0x0 is RAM lr c001f938 irq: irq 25 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 25 irq: irq 47 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 47 PCI: Probing PCI hardware pci 0000:00:10.0: reg 10 32bit mmio: [0x98000000-0x9fffffff] pci 0000:00:10.0: reg 14 io port: [0x400-0x4ff] pci 0000:00:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff] pci 0000:00:10.0: reg 30 32bit mmio: [0x90020000-0x9003ffff] pci 0000:00:10.0: supports D1 D2 irq: irq 48 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 48 pci 0001:10:12.0: reg 10 32bit mmio: [0x80084000-0x80085fff] pci 0001:10:12.0: supports D1 D2 pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:10:12.0: PME# disabled pci 0001:10:17.0: reg 10 32bit mmio: [0x80000000-0x8007ffff] pci 0001:10:18.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0001:10:19.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0001:10:1a.0: reg 10 32bit mmio: [0x80083000-0x80083fff] pci 0001:10:1b.0: reg 10 32bit mmio: [0x80082000-0x80082fff] pci 0001:10:1b.0: supports D1 D2 pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:10:1b.0: PME# disabled pci 0001:10:1b.1: reg 10 32bit mmio: [0x80081000-0x80081fff] pci 0001:10:1b.1: supports D1 D2 pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:10:1b.1: PME# disabled pci 0001:10:1b.2: reg 10 32bit mmio: [0x80080000-0x800800ff] pci 0001:10:1b.2: supports D1 D2 pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0001:10:1b.2: PME# disabled irq: irq 52 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 52 irq: irq 27 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27 irq: irq 28 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 28 irq: irq 29 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29 irq: irq 63 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 63 pci 0002:20:0d.0: reg 10 32bit mmio: [0xf5004000-0xf5007fff] pci 0002:20:0e.0: reg 10 32bit mmio: [0xf5000000-0xf5000fff] pci 0002:20:0e.0: supports D1 D2 pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot pci 0002:20:0e.0: PME# disabled pci 0002:20:0f.0: reg 10 32bit mmio: [0xf5200000-0xf53fffff] pci 0002:20:0f.0: reg 30 32bit mmio: [0xf5100000-0xf51fffff] irq: irq 39 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 39 irq: irq 40 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 40 irq: irq 41 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 41 PCI 0000:00 Cannot reserve Legacy IO [0x802000-0x802fff] pci_bus 0000:00: resource 0 io: [0x802000-0x1001fff] pci_bus 0000:00: resource 1 mem: [0xf1000000-0xf1ffffff] pci_bus 0000:00: resource 2 mem: [0x90000000-0x9fffffff] pci_bus 0001:10: resource 0 io: [0x00-0x7fffff] pci_bus 0001:10: resource 1 mem: [0xf3000000-0xf3ffffff] pci_bus 0001:10: resource 2 mem: [0x80000000-0x8fffffff] pci_bus 0002:20: resource 0 io: [0xff7fe000-0xffffdfff] pci_bus 0002:20: resource 1 mem: [0xf5000000-0xf5ffffff] Registering qe_ic with sysfs... bio: create slab at 0 vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default Switched to high resolution mode on CPU 0 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11982k freed Thermal assist unit not available setup_kcore: restrict size=3fffffff audit: initializing netlink socket (disabled) type=2000 audit(1258656191.520:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1488 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) radeonfb 0000:00:10.0: enabling device (0006 -> 0007) radeonfb 0000:00:10.0: Invalid ROM contents radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55 radeonfb: Retrieved PLL infos from Open Firmware radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=250.00 MHz radeonfb: PLL min 12000 max 35000 i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. i2c-adapter i2c-2: unable to read EDID block. radeonfb: Monitor 1 type DFP found radeonfb: EDID probed radeonfb: Monitor 2 type DFP found radeonfb: EDID probed Console: switching to colour frame buffer device 240x75 radeonfb (0000:00:10.0): ATI Radeon 5962 "Yb" Generic non-volatile memory driver v1.1 Linux agpgart interface v0.103 agpgart-uninorth 0000:00:0b.0: Apple UniNorth 2 chipset agpgart-uninorth 0000:00:0b.0: configuring for size idx: 8 agpgart-uninorth 0000:00:0b.0: AGP aperture is 32M @ 0x0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Serial: MPC52xx PSC UART driver brd: module loaded loop: module loaded MacIO PCI driver attached to Intrepid chipset irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32 irq: irq 24 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24 irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16 irq: irq 22 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 22 irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17 irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18 irq: irq 23 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 23 irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19 irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20 input: Macintosh mouse button emulation as /devices/virtual/input/input0 apm_emu: PMU APM Emulation initialized. adb: starting probe task... adb: finished probe task... Uniform Multi-Platform E-IDE driver ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002) ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39 Probing IDE interface ide0... hda: FUJITSU MHW2080AT, ATA DISK drive hdb: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/33 mode selected ide0 at 0xf106a000-0xf106a070,0xf106a160 on irq 39 ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 24 Probing IDE interface ide1... ide1 at 0xf103e000-0xf103e070,0xf103e160 on irq 24 ide-gd driver 1.18 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hda: cache flushes supported hda: [mac] hda1 hda2 hda3 hda4 hda5 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0001:10:1b.2: enabling device (0004 -> 0006) ehci_hcd 0001:10:1b.2: EHCI Host Controller ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 1 ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000 ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.ppc ehci_hcd usb usb1: SerialNumber: 0001:10:1b.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Apple USB OHCI 0001:10:18.0 disabled by firmware Apple USB OHCI 0001:10:19.0 disabled by firmware ohci_hcd 0001:10:1a.0: enabling device (0000 -> 0002) ohci_hcd 0001:10:1a.0: OHCI Host Controller ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.ppc ohci_hcd usb usb2: SerialNumber: 0001:10:1a.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0001:10:1b.0: enabling device (0000 -> 0002) ohci_hcd 0001:10:1b.0: OHCI Host Controller ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 3 ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.ppc ohci_hcd usb usb3: SerialNumber: 0001:10:1b.0 usb 1-2: new high speed USB device using ehci_hcd and address 2 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0001:10:1b.1: enabling device (0000 -> 0002) ohci_hcd 0001:10:1b.1: OHCI Host Controller ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 4 ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.ppc ohci_hcd usb usb4: SerialNumber: 0001:10:1b.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd: USB Universal Host Controller Interface driver mice: PS/2 mouse device common for all mice usb 1-2: New USB device found, idVendor=05ac, idProduct=1006 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: Keyboard Hub usb 1-2: Manufacturer: Apple, Inc. usb 1-2: SerialNumber: 000000000000 usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 hub 1-2:1.0: 3 ports detected PowerMac i2c bus pmu 2 registered PowerMac i2c bus pmu 1 registered PowerMac i2c bus mac-io 0 registered PowerMac i2c bus uni-n 1 registered PowerMac i2c bus uni-n 0 registered device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Running MSI bitmap self-tests ... PM: Resume from disk failed. registered taskstats version 1 input: PMU as /devices/virtual/input/input1 usb 2-1: new full speed USB device using ohci_hcd and address 2 rtc-generic rtc-generic: setting system clock to 2009-11-19 18:43:17 UTC (1258656197) Initalizing network drop monitor service Freeing unused kernel memory: 312k init dracut: dracut-002-13.4.git8f397a9b.fc12 udev: starting version 145 usb 2-1: New USB device found, idVendor=05ac, idProduct=1000 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.0/input/input2 generic-usb 0003:05AC:1000.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1/input0 input: HID 05ac:1000 as /devices/pci0001:10/0001:10:1a.0/usb2/2-1/2-1:1.1/input/input3 generic-usb 0003:05AC:1000.0002: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1/input1 dracut: Starting plymouth daemon usb 1-2.1: new low speed USB device using ehci_hcd and address 3 usb 1-2.1: New USB device found, idVendor=05ac, idProduct=0304 usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2.1: Product: Apple Optical USB Mouse usb 1-2.1: Manufacturer: Mitsumi Electric usb 1-2.1: configuration #1 chosen from 1 choice input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.1/1-2.1:1.0/input/input4 apple 0003:05AC:0304.0003: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0001:10:1b.2-2.1/input0 usb 1-2.2: new low speed USB device using ehci_hcd and address 4 usb 1-2.2: New USB device found, idVendor=05ac, idProduct=0221 usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2.2: Product: Apple Keyboard usb 1-2.2: Manufacturer: Apple, Inc usb 1-2.2: configuration #1 chosen from 1 choice input: Apple, Inc Apple Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input5 apple 0003:05AC:0221.0004: input,hidraw3: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0001:10:1b.2-2.2/input0 input: Apple, Inc Apple Keyboard as /devices/pci0001:10/0001:10:1b.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input6 apple 0003:05AC:0221.0005: input,hidraw4: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0001:10:1b.2-2.2/input1 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. dracut: Mounted root filesystem /dev/hda5 dracut: Loading SELinux policy type=1404 audit(1258656201.050:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 144735 rules. SELinux: 8192 avtab hash slots, 144735 rules. SELinux: 8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats SELinux: 75 classes, 144735 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda5, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1258656201.697:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 b43-pci-bridge 0001:10:12.0: enabling device (0004 -> 0006) ssb: Sonics Silicon Backplane found on PCI device 0001:10:12.0 sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) PHY ID: 4061e4, addr: 0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:0b:04:8e eth0: Found BCM5221 PHY firewire_ohci 0002:20:0e.0: enabling device (0000 -> 0002) pmac_zilog: 0.6 (Benjamin Herrenschmidt ) ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port firewire_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10 cfg80211: Calling CRDA to update world regulatory domain ide-cd driver 5.00 ide-cd: hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 firewire_core: created device fw0: GUID 001451fffe0b048e, S400 usb 2-1: USB disconnect, address 2 usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108 b43-phy0: Broadcom 4306 WLAN found (core revision 5) usb 2-1: new full speed USB device using ohci_hcd and address 3 usb 2-1: New USB device found, idVendor=05ac, idProduct=8204 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb phy0: Selected rate control algorithm 'minstrel' Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ] eth0: Link is up at 100 Mbps, full-duplex. irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30 irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21 irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 31 udev: renamed network interface wlan0 to wlan1 snd-aoa-fabric-layout: Using direct GPIOs irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61 snd-aoa-fabric-layout: can use this codec EXT3 FS on hda5, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda3, type ext3), uses xattr SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda4 Starting XFS recovery on filesystem: hda4 (logdev: internal) Ending XFS recovery on filesystem: hda4 (logdev: internal) SELinux: initialized (dev hda4, type xfs), uses xattr SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions eth0: Link is up at 100 Mbps, full-duplex. eth0: Pause is disabled usb 1-2.3: new high speed USB device using ehci_hcd and address 5 usb 1-2.3: New USB device found, idVendor=054c, idProduct=0010 usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2.3: Product: Sony DSC usb 1-2.3: Manufacturer: Sony usb 1-2.3: configuration #1 chosen from 2 choices Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts b43 ssb0:0: firmware: requesting b43/ucode5.fw b43 ssb0:0: firmware: requesting b43/pcm5.fw b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw b43-phy0: Loading OpenSource firmware version 410.31754 b43-phy0: Hardware crypto acceleration not supported by firmware b43-phy0: QoS not supported by firmware Registered led device: b43-phy0::tx Registered led device: b43-phy0::rx Registered led device: b43-phy0::radio ADDRCONF(NETDEV_UP): wlan1: link is not ready usb-storage: device scan complete scsi 0:0:0:0: Direct-Access Sony Sony DSC 6.00 PQ: 0 ANSI: 0 CCS sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 59392 512-byte logical blocks: (30.4 MB/29.0 MiB) sd 0:0:0:0: [sda] Write Protect is on sd 0:0:0:0: [sda] Mode Sense: 00 00 00 80 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] Attached SCSI removable disk wlan1: direct probe to AP 00:1e:8c:02:f4:95 try 1 wlan1: direct probe to AP 00:1e:8c:02:f4:95 try 2 wlan1 direct probe responded wlan1: authenticate with AP 00:1e:8c:02:f4:95 wlan1: authenticated wlan1: associate with AP 00:1e:8c:02:f4:95 wlan1: RX AssocResp from 00:1e:8c:02:f4:95 (capab=0x411 status=0 aid=3) wlan1: associated ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready eth0: no IPv6 routers present wlan1: no IPv6 routers present radeonfb 0000:00:10.0: Invalid ROM contents radeonfb 0000:00:10.0: Invalid ROM contents [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Initialized radeon 1.31.0 20080528 for 0000:00:10.0 on minor 0 VFS: Can't find ext3 filesystem on dev sda1. XFS: bad magic number XFS: SB validate failed SELinux: initialized (dev sda1, type vfat), uses genfs_contexts usb 1-2.3: USB disconnect, address 5 UDP: bad checksum. From 98.214.165.228:16880 to 192.168.1.67:43512 ulen 111 fuse init (API version 7.12) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts